OCT Reed Chain Transmitter

Downloads

OCT Reed Chain Transmitter

The OCT analog transmitter mounts directly to the side of the Atlas™, Aurora®, or Gemini™ chamber and provides a continuous 4-20 mA output signal proportional to liquid level. Using simple and reliable reed switches surface mounted to a printed circuit board, the unit provides level accuracy of ~0.50” (13mm). Activated by the field of the float magnets, the transmitter is totally non-invasive and designed for years of maintenance free service.

The OCT-400 analog transmitter mounts directly to the side of the Atlas or Gemini Chamber, providing a continuous 4-20 mA output signal proportional to liquid level.

Using simple and reliable reed switches, surface mounted to a printed circuit board, the unit provides level accuracy of 0.50″.

Each unit is manufactured with a stainless steel outer tube, which encases the reed switch assembly, and an aluminum or stainless steel enclosure which provides signal/power field wiring terminations, and carries CSA approval.

Measurement Principle

Activated by the field of the float magnets, the transmitter is totally non-invasive and designed for years of maintenance free service.

Features

  • Reed chain transmitter
  • Clamp-on mounting to MLI
  • FM and CSA approvals

Applications

  • Analog or digital indicator
  • Analog or digital display
  • Analog input to controller
  • Analog input to DCS
  • Connection to RTU, PLC
  • Analog input on PC card

Options

  • Top or bottom mount
  • 316 stainless steel or cast aluminum enclosure material

Technology of the OCT-400 Analog Transmitter

The OCT-400 analog transmitter mounts directly to the side of the MLI chamber, providing a continuous 4-20 mA output signal proportional to liquid level. Using simple and reliable reed switches surface mounted to a printed circuit board, the unit provides level accuracy of ±0.50″ (13 mm). Activated by the field of the float magnets, the transmitter is totally non-invasive and designed for years of maintenance free service.

Each unit is manufactured with a stainless steel outer tube which encases the reed switch assembly, and an aluminum or stainless steel enclosure which provides signal/power field wiring terminations.

JOLAC ENGINEERING SDN BHD (“JOLAC”) was incorporated as private limited company in Kuala Lumpur, Malaysia under the Companies Act 1965 on 16th December 1982.