Flame arresters designed to prevent the transmission of a deflagration fitted with two pipe connections one on each side of the flame arrester element. They are static flame arrester measurable type to be thereby characterised by that the quenching gaps of the flame arrester element can be technically drawn, measured and controlled. It can be designed bidirectional which prevents T flame transmission from both sides. The integrated temperature sensor integrated by the manufacturer used to indicate a stabilized flame into the flame arrester.
InLine Detonation Flame Arresters
InLine Detonation Flame Arresters
Pipe Protection
| Design | Protection System Tube protection against deflagration Tube protection against detonation Protection against continuous fire |
|---|---|
| Approval | EC type examination certificate based on to directive 94/9/EC, according to ATEX 95 and ISO 16852 |
| Protection | Gas/air or steam/air mixtures of the following explosion groups: – I (methane) NSW ≥ 1.14 mm – IIA (D) NSW ≥ 0.90 mm |
| Pipe Sizes | 1⁄2″, 3⁄4″, 1″, 11⁄4″ |
| Connection Standards | Rp according to ISO 71 (DIN 2999) BSP according to BS 21 NPTF according to ANSI B1.20.3 |
| Materials | Strip protection: Stainless Steel Body/cap: Stainless Steel, Carbon Steel |
| Coating | Optional |
Pipe Protection
| Protection System | Tube protection against deflagration Tube protection against detonation |
|---|---|
| Protection against continuous fire | |
| Approval | EC type examination certificate based on directive 94/9/EC, according to ATEX 95 and ISO 16852 |
| Protection | Gas/air or steam/air mixtures of the following explosion groups: – I (methane) NSW ≥ 1.14 mm – IIA (D) NSW ≥ 0.90 mm |
| Pipe Sizes | DN15, DN20, DN25, DN32 1/2″, 3/4″, 1″, 11⁄4″ |
| Connection Standards | DIN 2501 PN10 ANSI B16.5 – 150 RF |
| Materials | Strip protection: Stainless Steel Body/cap: Carbon Steel, Stainless Steel |
| Coating | Optional |
Pipe Protection
| Protection System | Tube protection against deflagration Tube protection against detonation |
|---|---|
| Approval | EC type examination certificate based on directive 94/9/EC, according to ATEX 95 and ISO 16852 |
| Protection | Gas/air or steam/air mixtures of the following explosion groups: – I (methane) NSW ≥ 1.14 mm – IIA (D) NSW ≥ 0.90 mm – IIB3 (C) NSW ≥ 0.65 mm – IIC (B) NSW ≥ 0.50 mm |
| Pipe Sizes | 1/8″, 1/4″, 3/8″, 1/2″ |
| Connection Standards | Rp according to ISO 71 (DIN 2999) BSP according to BS 21 NPTF according to ANSI B1.20.3 |
| Materials | Strip protection: Stainless Steel, Special Alloys Body/cap: Stainless Steel, Special Alloys |
Pipe Protection
| Protection System | Tube protection against deflagration Tube protection against detonation |
|---|---|
| Approval | EC type examination certificate based upon Directive 94/9/EC, according to ATEX 95 and ISO 16852 |
| Protection | Gas/air or steam/air mixtures of the explosion groups: – I (methane) NSW ≥ 1.14 mm – IIA (D) NSW ≥ 0.90 mm – IIB3 (C) NSW ≥ 0.65 mm – IIC (B) NSW ≥ 0.50 mm |
| Pipe Sizes | DN25, DN32, DN40, DN50, DN65, DN80 1″, 11⁄4″, 11⁄2″, 2″, 21⁄2″, 3″ |
| Connection Standards | DIN 2501 PN10 ANSI B16.5 – 150 RF |
| Materials | Strip protection: Stainless Steel, Special Alloys Rust cage: Stainless Steel, Special Alloys Body: Carbon Steel, Stainless Steel, Special Alloys |
| Coating | Optional |
| Temperature Sensor | Resistance thermometer with ignition protection type Inherently safe (E Ex i) Pressureresistant enclosure (E Ex d) |
Pipe Protection
| Protection System | Tube protection against deflagration Tube protection against detonation |
|---|---|
| Approval | EC type examination certificate based upon Directive 94/9/EC, according to ATEX 95 and ISO 16852 |
| Protection | Gas/air or steam/air mixtures of the explosion groups: – I (methane) NSW ≥ 1.14 mm – IIA (D) NSW ≥ 0.90 mm – IIB3 (C) NSW ≥ 0.65 mm – IIC (B) NSW ≥ 0.50 mm |
| Pipe Sizes | 1″, 11⁄4″, 11⁄2″, 2″, 21⁄2″, 3″ |
| Connection Standards | Rp according to ISO 71 (DIN 2999) BSP according to BS 21 NPTF according to ANSI B1.20.3 |
| Materials | Strip protection: Stainless Steel, Special Alloys Rust cage: Stainless Steel, Special Alloys Body: Carbon Steel, Stainless Steel, Special Alloys |
| Coating | Optional |
| Temperature Sensor | Resistance thermometer with ignition protection type – Inherently safe (E Ex i) – Pressureresistant enclosure (E Ex d) |
Pipe Protection
| Protection System | Tube protection against deflagration Tube protection against detonation |
|---|---|
| Approval | EC type examination certificate based upon Directive 94/9/EC, according to ATEX 95 and ISO 16852 |
| Protection | Gas/air or steam/air mixtures of the explosion groups: – I (methane) NSW ≥ 1.14 mm – IIA (D) NSW ≥ 0.90 mm – IIB3 (C) NSW ≥ 0.65 mm – IIC (B) NSW ≥ 0.50 mm |
| Pipe Sizes | 1″, 11⁄4″, 11⁄2″, 2″, 21⁄2″, 3″ |
| Connection Standards | Rp zgodnie z normą ISO 71 (DIN 2999) BSP wg BS 21 NPTF wg ANSI B1.20.3 |
| Materials | Strip protection: Stainless Steel, Special Alloys Rust cage: Stainless Steel, Special Alloys Body: Carbon Steel, Stainless Steel, Special Alloys |
| Coating | Optional |
| Temperature Sensor | Resistance thermometer with ignition protection type – Inherently safe (E Ex i) – Pressureresistant enclosure (E Ex d) |