End of Line Deflagration Arresters

End of Line Deflagration Arresters

Flame arresters designed to prevent the transmission of a deflagration fitted with one pipe connections on one side of the flame arrester element. They are static flame arrester measurable type to be thereby charcterised by that the quenching gaps of the flame arrester element can be technically drawn, measured and controlled. The integrated temperature sensor integrated by the manufacturer used to indicate a stabilized flame into the flame arrester.

End of Line
Protection Gas/air or steam/air mixtures of the following explosion groups:
– I (methane) NSW ≥ 1.14 mm
– IIA (D) NSW ≥ 0.90 mm
– IIB3 (C) NSW ≥ 0.65 mm
– IIC (B) NSW ≥ 0.50 mm
Pipe Sizes DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400
1″, 11⁄4″, 11⁄2″, 2″, 21⁄2″, 3″, 4″, 5″, 6″, 8″, 10″, 12″, 14″, 16″
Connection Standards ISO 7005 PN10
ANSI B16.5 – 150 RF
Materials Strip protection: Stainless Steel, Special Alloys
Body: Carbon Steel, Stainless Steel, Special Alloys
Hood: Stainless Steel
Coating Optional
Protection System End of line Deflagration Arrester
Approval EC type examination certificate based upon
Directive 94/9/EC, according to ATEX 95 and ISO 16852
End of Line
Pipe Sizes DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN 400
1″, 11⁄4″, 11⁄2″, 2″, 21⁄2″, 3″, 4″, 5″, 6″, 8″, 10″, 12″, 14″, 16″
Connection Standards ISO 7005 PN10
ANSI B16.5 – 150 RF
Materials Strip protection: Stainless Steel, Special Alloys
Body: Carbon Steel, Stainless Steel, Special Alloys
Hood: Stainless Steel
Coating Optional
Temperature Sensor Resistance thermometer with ignition protection type
– Inherently safe (E Ex i)
– Pressureresistant enclosure (E Ex d)
Protection System End of line Deflagration and Short time Burning Flame Arrester
Approval EC type examination certificate based upon
Directive 94/9/EC, according to ATEX 95 and ISO 16852
Protection Gas/air or steam/air mixtures of the following explosion groups:
– I (methane) NSW ≥ 1.14 mm
– IIA (D) NSW ≥ 0.90 mm
– IIB3 (C) NSW ≥ 0.65 mm
– IIC (B) NSW ≥ 0.50 mm
End of Line
Pipe Sizes DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN 400
1″, 11⁄4″, 11⁄2″, 2″, 21⁄2″, 3″, 4″, 5″, 6″, 8″, 10″, 12″, 14″, 16″
Connection Standards ISO 7005 PN10
ANSI B16.5 – 150 RF
Materials Strip protection: Stainless Steel, Special Alloys
Body: Carbon Steel, Stainless Steel, Special Alloys
Hood: Stainless Steel
Coating Optional
Temperature Sensor Resistance thermometer with ignition protection type
– Inherently safe (E Ex i)
– Pressureresistant enclosure (E Ex d)
Protection System End of line Deflagration and Short time Burning Flame Arrester
Approval EC type examination certificate based upon
Directive 94/9/EC, according to ATEX 95 and ISO 16852
Protection Gas/air or steam/air mixtures of the following explosion groups:
– I (methane) NSW ≥ 1.14 mm
– IIA (D) NSW ≥ 0.90 mm
– IIB3 (C) NSW ≥ 0.65 mm
– IIC (B) NSW ≥ 0.50 mm
End of Line
Pipe Sizes DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN 400
1″, 11⁄4″, 11⁄2″, 2″, 21⁄2″, 3″, 4″, 5″, 6″, 8″, 10″, 12″, 14″, 16″
Connection Standards ISO 7005 PN10
ANSI B16.5 – 150 RF
Materials Strip protection: Stainless Steel, Special Alloys
Body: Carbon Steel, Stainless Steel, Special Alloys
Hood: Stainless Steel
Coating Optional
Temperature Sensor Resistance thermometer with ignition protection type
– Inherently safe (E Ex i)
– Pressureresistant enclosure (E Ex d)
Protection System End of line Deflagration and Short time Burning Flame Arrester
Approval EC type examination certificate based upon
Directive 94/9/EC, according to ATEX 95 and ISO 16852
Protection Gas/air or steam/air mixtures of the following explosion groups:
– I (methane) NSW ≥ 1.14 mm
– IIA (D) NSW ≥ 0.90 mm
– IIB3 (C) NSW ≥ 0.65 mm
– IIC (B) NSW ≥ 0.50 mm
JOLAC ENGINEERING SDN BHD (“JOLAC”) was incorporated as private limited company in Kuala Lumpur, Malaysia under the Companies Act 1965 on 16th December 1982.