Flame arrester designed to prevent the flame transmission during and after endurance burning. The type can be InLine or End of line flame arrester. They are static flame arrester measurable type to be thereby charcterised by that the quenching gaps of the flame arrester element can be technically drawn, measured and controlled.
Endurance Burning Flame Arrester
Endurance Burning Flame Arrester
Pipe Protection
| Design | Protection System Tube protection against deflagration Tube protection against detonation Protection against continuous fire |
|---|---|
| Approval | EC type examination certificate based on to directive 94/9/EC, according to ATEX 95 and ISO 16852 |
| Protection | Gas/air or steam/air mixtures of the following explosion groups: – I (methane) NSW ≥ 1.14 mm – IIA (D) NSW ≥ 0.90 mm |
| Pipe Sizes | 1⁄2″, 3⁄4″, 1″, 11⁄4″ |
| Connection Standards | Rp nach ISO 71 (DIN 2999) BSP nach BS 21 NPTF nach ANSI B1.20.3 |
| Materials | Strip protection: Stainless Steel Body/cap: Stainless Steel, Carbon Steel |
| Coating | Optional |
Pipe Protection
| Protection System | Tube protection against deflagration Tube protection against detonation Protection against continuous fire |
|---|---|
| Approval | EC type examination certificate based on directive 94/9/EC, according to ATEX 95 and ISO 16852 |
| Protection | Gas/air or steam/air mixtures of the following explosion groups: – I (methane) NSW ≥ 1.14 mm – IIA (D) NSW ≥ 0.90 mm |
| Pipe Sizes | DN15, DN20, DN25, DN32 1/2″, 3/4″, 1″, 11⁄4″ |
| Connection Standards | DIN 2501 PN10 ANSI B16.5 – 150 RF |
| Materials | Strip protection: Stainless Steel Body/cap: Carbon Steel, Stainless Steel |
| Coating | Optional |
Pipe Protection
| Protection System | Tube protection against deflagration Tube protection against detonation |
|---|---|
| Approval | EC type examination certificate based on directive 94/9/EC, according to ATEX 95 and ISO 16852 |
| Protection | Gas/air or steam/air mixtures of the following explosion groups: – I (methane) NSW ≥ 1.14 mm – IIA (D) NSW ≥ 0.90 mm – IIB3 (C) NSW ≥ 0.65 mm – IIC (B) NSW ≥ 0.50 mm |
| Pipe Sizes | 1/8″, 1/4″, 3/8″, 1/2″ |
| Connection Standards | Rp according to ISO 71 (DIN 2999) BSP according to BS 21 NPTF according to ANSI B1.20.3 |
| Materials | Strip protection: Stainless Steel, Special Alloys Body/cap: Stainless Steel, Special Alloys |
Pipe Protection
| Protection System | Tube protection against deflagration |
|---|---|
| Approval | EC type examination certificate based on directive 94/9/EC, according to ATEX 95 and ISO 16852 |
| Protection | Gas/air or steam/air mixtures of the following explosion groups: – I (methane) NSW ≥ 1.14 mm – IIA (D) NSW ≥ 0.90 mm |
| Pipe Size | 11/2“ |
| Connection Standards | Rp according to ISO 71 (DIN 2999) BSP according to BS 21 NPTF according to ANSI B1.20.3 |
| Materials | Strip protection: Stainless Steel Body/cap: Carbon Steel, Stainless Steel |
| Coating | Optional |
| Temperature Sensor | Resistance thermometer with ignition protection type – Inherently safe (E Ex i) – Pressureresistant enclosure (E Ex d) |
Pipe Protection
| Protection System | Tube protection against deflagration |
|---|---|
| Approval | EC type examination certificate based on directive 94/9/EC, according to ATEX 95 and ISO 16852 |
| Protection | Gas/air or steam/air mixtures of the explosion groups: – I (methane) NSW ≥ 1.14 mm – IIA (D) NSW ≥ 0.90 mm |
| Pipe Sizes | DN40 11/2“ |
| Connection Standards | DIN 2501 PN10 ANSI B16.5 – 150 RF |
| Materials | Strip protection: Stainless Steel Body/cap: Carbon Steel, Stainless Steel |
| Coating | Optional |
| Temperature Sensor | Resistance thermometer with ignition protection type – Inherently safe (E Ex i) – Pressureresistant enclosure (E Ex d) |
Pipe Protection
| Protection System | Tube protection against deflagration Tube protection against detonation |
|---|---|
| Approval | EC type examination certificate based upon Directive 94/9/EC, according to ATEX 95 and ISO 16852 |
| Protection | Gas/air or steam/air mixtures of the explosion groups: – I (methane) NSW ≥ 1.14 mm – IIA (D) NSW ≥ 0.90 mm – IIB3 (C) NSW ≥ 0.65 mm – IIC (B) NSW ≥ 0.50 mm |
| Pipe Sizes | DN25, DN32, DN40, DN50, DN65, DN80 1″, 11⁄4″, 11⁄2″, 2″, 21⁄2″, 3″ |
| Connection Standards | DIN 2501 PN10 ANSI B16.5 – 150 RF |
| Materials | Strip protection: Stainless Steel, Special Alloys Rust cage: Stainless Steel, Special Alloys Body: Carbon Steel, Stainless Steel, Special Alloys |
| Coating | Optional |
| Temperature Sensor | Resistance thermometer with ignition protection type Inherently safe (E Ex i) Pressureresistant enclosure (E Ex d) |
Pipe Protection
| Protection System | Tube protection against deflagration Tube protection against detonation |
|---|---|
| Approval | EC type examination certificate based upon Directive 94/9/EC, according to ATEX 95 and ISO 16852 |
| Protection | Gas/air or steam/air mixtures of the explosion groups: – I (methane) NSW ≥ 1.14 mm – IIA (D) NSW ≥ 0.90 mm – IIB3 (C) NSW ≥ 0.65 mm – IIC (B) NSW ≥ 0.50 mm |
| Pipe Sizes | 1″, 11⁄4″, 11⁄2″, 2″, 21⁄2″, 3″ |
| Connection Standards | Rp according to ISO 71 (DIN 2999) BSP according to BS 21 NPTF according to ANSI B1.20.3 |
| Materials | Strip protection: Stainless Steel, Special Alloys Rust cage: Stainless Steel, Special Alloys Body: Carbon Steel, Stainless Steel, Special Alloys |
| Coating | Optional |
| Temperature Sensor | Resistance thermometer with ignition protection type – Inherently safe (E Ex i) – Pressureresistant enclosure (E Ex d) |
Pipe Protection
| Protection System | Tube protection against deflagration Tube protection against detonation |
|---|---|
| Approval | EC type examination certificate based upon Directive 94/9/EC, according to ATEX 95 and ISO 16852 |
| Protection | Gas/air or steam/air mixtures of the explosion groups: – I (methane) NSW ≥ 1.14 mm – IIA (D) NSW ≥ 0.90 mm – IIB3 (C) NSW ≥ 0.65 mm – IIC (B) NSW ≥ 0.50 mm |
| Pipe Sizes | 1″, 11⁄4″, 11⁄2″, 2″, 21⁄2″, 3″ |
| Connection Standards | Rp according to ISO 71 (DIN 2999) BSP according to BS 21 NPTF according to ANSI B1.20.3 |
| Materials | Strip protection: Stainless Steel, Special Alloys Rust cage: Stainless Steel, Special Alloys Body: Carbon Steel, Stainless Steel, Special Alloys |
| Coating | Optional |
| Temperature Sensor | Resistance thermometer with ignition protection type – Inherently safe (E Ex i) – Pressureresistant enclosure (E Ex d) |
| Protection | Gas/air or steam/air mixtures of the following explosion groups: – I (methane) NSW ≥ 1.14 mm – IIA (D) NSW ≥ 0.90 mm |
|---|---|
| Pipe Sizes | DN40, DN50, DN65, DN80 11⁄2″, 2″,21⁄2″, 3″ |
| Connection Standards | ISO 7005 PN10 ANSI B16.5 150 RF Rp according to ISO 71 (DIN 2999) BSP according to BS 21 NPTF according to ANSI B1.20.3 |
| Materials | Strip protection: Stainless Steel Body:Carbon Steel, Stainless Steel Hood: Stainless Steel |
| Coating | Optional |
| Protection system | End of line deflagration and continuous burning flame arrester |
| Approval | EC type examination certificate based upon Directive 94/9/EC, according to ATEX 95 and ISO 16852 |
| Design | End of Line Deflagration and Endurance Burning Safer Arrester |
|---|---|
| Certificate | EC prototype test certificate according guide line 94/9/EC with ATEX95 and ISO16852 |
| Application | gas/air or steam/air mixtures of the explosion groups I (methane) MESG ≥ 1,14 mm IIA (D) MESG > 0,90 mm |
| Nominal Diameter | DN25, DN32, DN40, DN50 or 1″, 1¼”, 1½”, 2″ |
| Connection | DIN 2632 PN10 or ANSI B16.5 150 RF Rp to ISO 71 (DIN 2999) BSP to BS 21 NPTF to ANSI B1.20.3 |
| Material | Metal Foil Element: Stainless Steel Body: Carbon Steel, Stainless Steel Hood: Plexiglas |
| Painting Optional |